Turn-Mill Centers
Mazak INTEGREX i-250H / i-250HS turn-mill centers machine complete rotational parts with milling in one setup.
What We Make With It
Milling and turning run in one cycle on the same datum, so concentricity and coaxiality come from the machine, not from re-fixturing. Robot joint parts from these centers hold coaxiality within 0.01 mm.
- Complex rotational parts with milled flats and cross holes
- Shafts, valve bodies and connector bodies
- Robot joint housings turned and milled complete
- Parts that would otherwise need two machines and two setups
Group Highlights
- Milling and turning in one setup
- Shafts, valve bodies, complex rotational parts
- Counted inside the 11 five-axis units
Machine List
Verified August 2026 inventory. Exact travels and spindles for your part are confirmed at quoting.
| Brand | Model / fleet | Qty | Process capability | Materials | Typical tolerance |
|---|---|---|---|---|---|
| Mazak | INTEGREX i-250H / i-250HS | 2 | 9-axis turn-mill, 5-axis machining (in service since Feb 2026) | Aluminum, stainless, titanium, copper | ±0.005 mm (to ±0.002 mm with full CMM check) |
Related Processes
Turn-Mill MachiningCNC Turning
Inspection reports and CMM data follow the Inspection & QC process. See all equipment groups on the capabilities page.
Ready to Machine This Part?
Send your 2D/3D drawings and get a quote within 24 hours. No MOQ for prototypes and small lots.
Request a Quote