Automotive Parts We Machine
Representative automotive and NEV part families from development and pre-series programs.
Part Families, Tolerances, Order Patterns
| Part family | Common materials | Key tolerances | Typical finish | Typical order |
|---|---|---|---|---|
| Charging connector housings | 6061-T6 | +/-0.02 mm mating features | Type II black anodize | 100 to 1,000 pcs |
| ADAS sensor brackets | 6061-T6, 6082-T6 | +/-0.02 mm datum features | Alodine + paint ready | 200 to 2,000 pcs |
| Machined cold plates | 6061-T6 | +/-0.05 mm profile, flatness 0.05 mm | Clear anodize | 50 to 500 pcs |
| Test fixture baseplates | MIC-6 | Flatness 0.02 mm over 300 mm | Clear anodize | 10 to 50 pcs |
| Connector pin carriers | C36000 | +/-0.01 mm, M1.6 threads | Ni plated | 1,000 to 10,000 pcs |
| Brake system fittings | 303, 316L | Thread gauge 100 percent, leak tested | Passivated | 1,000 to 10,000 pcs |
| Motor end bells | 6061-T6 | Bore +/-0.01 mm, pilot concentric | Clear anodize | 200 to 2,000 pcs |
| Pump housings, coolant | 6061-T6 | Sealing faces +/-0.02 mm | Clear anodize | 200 to 2,000 pcs |
| Interior mechanism parts | 6061-T6, POM | +/-0.05 mm cosmetic | Anodize / POM bare | 500 to 5,000 pcs |
| Robot cell fixture plates | MIC-6 | Flat 0.02 mm over 300 mm | Clear anodize | 10 to 50 pcs |
How to use this page: these are families we run repeatedly, so process risk is low and lead times are predictable. If your part is not listed, it is likely still in scope: send the drawing and we answer within 24 hours.
Material details: aluminum and brass and copper.
Automotive Parts FAQ
Do you support IATF 16949 documentation?
We are not IATF certified; for development and pre-series parts we provide PPAP-style documentation packages (dimensional reports, material certs, FAI) that tier-1 quality teams file directly.
What batch sizes do automotive customers run?
Development runs of 10 to 100 parts, then repeat batches of 100 to 2,000 as the design stabilizes.
Fast Picks
Get a quote in 24 h Case studies Inspection & QC Tolerance standards
Send Your Drawing
Quote with engineering feedback within 24 hours; prototypes in 7 to 15 days.
Request a Quote