New Energy Parts We Machine
Ten part families for storage, PV and charging hardware programs.
100+CNC machines, 11 five-axis
40+precision inspection instruments
±0.005 mmstandard tolerance
19+countries served
24 hquote on complete files
Ten Part Families We Run Repeatedly
| Part family | Common materials | Key tolerances | Typical finish | Typical order |
|---|---|---|---|---|
| Battery pack structural brackets | 6061-T6 | +/-0.05 mm, datum +/-0.02 mm | Clear anodize | 200 to 2,000 pcs |
| Busbar support insulators | POM, PEEK | +/-0.02 mm, high dielectric | As-machined | 500 to 5,000 pcs |
| Cooling plate end caps and manifolds | 6061-T6 | Port position +/-0.02 mm, leak tested | Clear anodize | 100 to 1,000 pcs |
| Charging connector housings | 6061-T6 | Mating features +/-0.02 mm | Type II black anodize | 100 to 1,000 pcs |
| PV tracker drive components | 1045, 6061-T6 | Gear seats +/-0.02 mm | Anodize / black oxide | 200 to 2,000 pcs |
| Inverter heatsink plates | 6061-T6, C11000 | Base flat 0.02 mm | Clear anodize | 100 to 1,000 pcs |
| Energy storage rack fittings | 6061-T6 | +/-0.05 mm | Anodize | 500 to 5,000 pcs |
| Hydrogen and fuel cell test plates | 316L, graphite-filled | Sealing faces +/-0.02 mm | Passivated | 50 to 500 pcs |
| Sensor housings for BMS | 6061-T6, 303 | +/-0.01 mm seats | Anodize / passivated | 500 to 5,000 pcs |
| Test fixture plates for cell QA | MIC-6 | Flat 0.02 mm over 300 mm | Clear anodize | 10 to 100 pcs |
How to use this page: these families run on repeat programs, so process risk is low and lead times are predictable. If your part is not listed it is likely still in scope; send the drawing and we answer within 24 hours.
Industry page: new energy machining. Thermal materials: copper alloys.
Worked examples with full measurement data: case studies.
Get a quote in 24 h Inspection & QC Tolerance standards
Frequently Asked Questions
Do cooling plate components ship leak-test documented?
Yes, manifold and end cap assemblies that carry coolant are pressure and leak tested with results recorded per batch.
Send Your Drawing
Quote with engineering feedback within 24 hours; prototypes in 7 to 15 days.
Request a Quote