Aerospace Parts We Machine
Ten aerospace part families machined under our AS9100D audited system, with FAI per AS9102 available on every family.
100+CNC machines, 11 five-axis
40+precision inspection instruments
±0.005 mmstandard tolerance
19+countries served
24 hquote on complete files
Ten Part Families We Run Repeatedly
| Part family | Common materials | Key tolerances | Typical finish | Typical order |
|---|---|---|---|---|
| Brackets and fittings, machined from solid | 7075-T6, 2024-T351 | Position +/-0.02 mm, FOS kept | Alodine / anodize | 20 to 200 pcs |
| Turbine housing and stator vane assemblies | SUS304, Inconel 718 | Vane spacing +/-0.02 mm | Bare, heat resistant | 10 to 100 pcs |
| PEI (Ultem) wastewater system parts | PEI rod direct from Germany | +/-0.02 mm, Ra 0.8 | As-machined | 50 to 300 pcs |
| Hydraulic manifold blocks | 316L, 6061-T6 | Port position +/-0.02 mm, pressure tested | Passivated | 20 to 200 pcs |
| Actuator housings | 6061-T6, 17-4PH | Bore +/-0.01 mm, sealing faces flat | Anodize / passivated | 20 to 200 pcs |
| Avionics chassis and cold plates | 6061-T6 | Flat 0.02 mm, channel leak tested | Alodine | 50 to 300 pcs |
| Fastener-adjacent fittings | Ti-6Al-4V | Position +/-0.02 mm | Alodine per drawing | 50 to 500 pcs |
| Test rig columns and plates | 1045, 7075-T6 | Flat 0.02 mm over 500 mm | Ground / anodize | 5 to 50 pcs |
| Valve bodies, cryogenic service | 316L, Inconel 718 | Seat roundness 0.003 mm | Passivated, cleaned | 20 to 200 pcs |
| Ground support equipment parts | 6061-T6, 1045 | +/-0.05 mm general | Anodize / black oxide | 50 to 500 pcs |
How to use this page: these families run on repeat programs, so process risk is low and lead times are predictable. If your part is not listed it is likely still in scope; send the drawing and we answer within 24 hours.
PEI program detail: aerospace case study and turbine housing case study. Quality system: certifications.
Worked examples with full measurement data: case studies.
Get a quote in 24 h Inspection & QC Tolerance standards
Frequently Asked Questions
Do you provide FAI per AS9102?
Yes, Forms 1, 2 and 3 with ballooned drawings and CMM data, in English, filed per part number for repeat orders.
Which certifications back your aerospace work?
AS9100D / EN 9100 audited by Bureau Veritas (cert CN059081), ISO 9001:2015, and D-U-N-S registration for supplier onboarding.
Send Your Drawing
Quote with engineering feedback within 24 hours; prototypes in 7 to 15 days.
Request a Quote