Electronics Parts We Machine
Representative electronics part families from recent production.
Part Families, Tolerances, Order Patterns
| Part family | Common materials | Key tolerances | Typical finish | Typical order |
|---|---|---|---|---|
| Finned heatsinks | 6061-T6, C11000 | Fin profile +/-0.05 mm, base flatness 0.02 mm | Clear anodize, masked faces | 100 to 1,000 pcs |
| Enclosure frames | 6061-T6 | +/-0.05 mm cosmetic, +/-0.02 mm mating | Type II black anodize | 500 to 5,000 pcs |
| RF and connector housings | C36000, C14500 | +/-0.01 mm shield cavities | Bright or Ni plated | 1,000 to 10,000 pcs |
| Thermal test fixtures | 6061 + C11000 inserts | +/-0.01 mm sensor bores | Clear anodize | 10 to 100 pcs |
| Camera and lidar mounts | 6061-T6 | +/-0.02 mm datum features | Black anodize | 200 to 2,000 pcs |
| Vapor chamber mounting plates | 6061-T6 | Flat 0.02 mm, masked pads | Clear anodize, masked | 100 to 1,000 pcs |
| Speaker and camera housings | 6061-T6 | Cosmetic faces per agreed map | Type II cosmetic anodize | 500 to 5,000 pcs |
| SIM and connector trays | C36000, POM | Pocket +/-0.02 mm | Ni plated / bare | 1,000 to 10,000 pcs |
| EMI shield frames | 6061-T6 | Gasket face flat 0.02 mm | Alodine | 500 to 5,000 pcs |
| Prototype mid-frames | 7075-T6 | +/-0.02 mm mating, cosmetic outside | Black anodize | 50 to 500 pcs |
How to use this page: these are families we run repeatedly, so process risk is low and lead times are predictable. If your part is not listed, it is likely still in scope: send the drawing and we answer within 24 hours.
Thermal material data: copper alloy comparison.
Electronics Parts FAQ
Can you hold cosmetic anodize consistency across batches?
Yes: cosmetic face map agreed before production, anodize class per face, and an approved inspection sample kept on file per part number.
Fast Picks
Get a quote in 24 h Case studies Inspection & QC Tolerance standards
Send Your Drawing
Quote with engineering feedback within 24 hours; prototypes in 7 to 15 days.
Request a Quote