Industrial Equipment Parts We Machine
Ten part families for automation and equipment builders, from fixture families to machine shafts.
100+CNC machines, 11 five-axis
40+precision inspection instruments
±0.005 mmstandard tolerance
19+countries served
24 hquote on complete files
Ten Part Families We Run Repeatedly
| Part family | Common materials | Key tolerances | Typical finish | Typical order |
|---|---|---|---|---|
| Fixture base plates | MIC-6, 1045 | Flat 0.02 mm, bores +/-0.01 mm | Clear anodize / ground | 10 to 100 pcs |
| Clamp arms and linkages | 6061-T6, 4140 | Pivot bores +/-0.01 mm | Anodize / black oxide | 50 to 500 pcs |
| Locating pins and bushings | 4140, C36000 | ID/OD +/-0.005 mm | Hardened / black oxide | 200 to 2,000 pcs |
| Linear guide rail seats | 1045, 6061-T6 | Parallel 0.01 mm over length | Ground | 50 to 300 pcs |
| Machine brackets and columns | 6061-T6, 1045 | +/-0.05 mm general, datum +/-0.02 mm | Anodize / painted | 50 to 500 pcs |
| Gearbox and motor mounts | 1045, 6061-T6 | Bore position +/-0.02 mm | Black oxide / anodize | 100 to 1,000 pcs |
| Conveyor components | 6061-T6, POM | +/-0.05 mm, wear faces smooth | Anodize / POM bare | 500 to 5,000 pcs |
| Sensor brackets and mounts | 6061-T6 | +/-0.02 mm datum features | Black anodize | 200 to 2,000 pcs |
| Pneumatic manifold blocks | 6061-T6 | Port position +/-0.02 mm, leak tested | Clear anodize | 50 to 500 pcs |
| Replacement machine shafts | 4140, 4340 | Journal +/-0.005 mm after grind | Q&T, ground journals | 10 to 200 pcs |
How to use this page: these families run on repeat programs, so process risk is low and lead times are predictable. If your part is not listed it is likely still in scope; send the drawing and we answer within 24 hours.
Materials: aluminum and steel. Service: CNC machining.
Worked examples with full measurement data: case studies.
Get a quote in 24 h Inspection & QC Tolerance standards
Frequently Asked Questions
Can you match a broken part with no drawing?
Yes: send the part or its photos and key measurements; we reverse-draw it for your approval before quoting production.
Send Your Drawing
Quote with engineering feedback within 24 hours; prototypes in 7 to 15 days.
Request a Quote