Communications Parts We Machine
Ten communications hardware part families with RF-relevant quality points.
100+CNC machines, 11 five-axis
40+precision inspection instruments
±0.005 mmstandard tolerance
19+countries served
24 hquote on complete files
Ten Part Families We Run Repeatedly
| Part family | Common materials | Key tolerances | Typical finish | Typical order |
|---|---|---|---|---|
| RF cavity housings | 6061-T6 | Cavity +/-0.02 mm, documented | Alodine | 100 to 1,000 pcs |
| Cavity filter bodies and tuning plates | 6061-T6, brass | Tuner threads +/-0.02 mm | Alodine / bare brass | 200 to 2,000 pcs |
| Amplifier heatsinks | 6061-T6, C11000 | Base flat 0.02 mm, fin profile +/-0.05 mm | Clear anodize, masked | 100 to 1,000 pcs |
| Connector backshells | C36000, 303 | Thread gauge 100 percent | Ni plated | 1,000 to 10,000 pcs |
| Ground blocks and bus bars | C11000, C14500 | +/-0.02 mm, conductive faces bare | Tin plated on request | 500 to 5,000 pcs |
| Machined cold plates | 6061-T6 | Channel position +/-0.05 mm, leak tested | Clear anodize | 50 to 500 pcs |
| Waveguide flanges | 6061-T6 | Flange face flat 0.01 mm | Alodine | 100 to 1,000 pcs |
| Antenna mounts and brackets | 6061-T6 | +/-0.05 mm, weather resistant finish | Anodize or paint ready | 200 to 2,000 pcs |
| Shielding cans and covers | 6061-T6 | Gasket face flat 0.02 mm | Alodine | 500 to 5,000 pcs |
| Powder amplifier housings | 6061-T6 | Sealing faces +/-0.02 mm | Anodize, masked pads | 100 to 1,000 pcs |
How to use this page: these families run on repeat programs, so process risk is low and lead times are predictable. If your part is not listed it is likely still in scope; send the drawing and we answer within 24 hours.
Finish detail: surface treatment options. Copper data: copper alloy comparison.
Worked examples with full measurement data: case studies.
Get a quote in 24 h Inspection & QC Tolerance standards
Frequently Asked Questions
Do you mask anodize on RF grounding faces?
Yes, masking maps are agreed at quoting and inspected per batch; conductivity on alodine faces is the default for RF hardware.
Send Your Drawing
Quote with engineering feedback within 24 hours; prototypes in 7 to 15 days.
Request a Quote