Optical Parts We Machine
Ten optical equipment part families with the accuracy features that matter at assembly.
100+CNC machines, 11 five-axis
40+precision inspection instruments
±0.005 mmstandard tolerance
19+countries served
24 hquote on complete files
Ten Part Families We Run Repeatedly
| Part family | Common materials | Key tolerances | Typical finish | Typical order |
|---|---|---|---|---|
| Lens barrels | SUS304, 6061-T6 | Concentricity 0.005 mm, Ra 0.4 bore | Bare or black anodized | 50 to 500 pcs |
| Retention rings and lock nuts | SUS303, 6061 | Thread gauge 100 percent, face square | Blackened / anodized | 200 to 2,000 pcs |
| Mirror mounts | 6061-T6, MIC-6 | Pad flatness 0.005 mm | Black anodize, masked | 50 to 500 pcs |
| Prism tables | MIC-6, 7075 | Flatness 0.003 mm | Bare, stress relieved | 20 to 200 pcs |
| Adjustment stage bodies | 7075-T6 | Guide rails parallel 0.005 mm | Black anodize | 20 to 200 pcs |
| Camera module carriers | 6061-T6 | Lens seat +/-0.01 mm | Black anodize | 500 to 5,000 pcs |
| Focus mechanism sleeves | SUS303, brass | ID/OD +/-0.005 mm, low friction | Bare / lubricated | 500 to 5,000 pcs |
| Beam path adapters | 6061-T6 | Port position +/-0.01 mm | Black anodize inside and out | 100 to 1,000 pcs |
| Filter wheel plates | 7075-T6 | Slot position +/-0.02 mm | Black anodize | 50 to 500 pcs |
| Optical lab fixtures | MIC-6 | Flat 0.003 mm, holes +/-0.01 mm | Clear anodize | 10 to 50 pcs |
How to use this page: these families run on repeat programs, so process risk is low and lead times are predictable. If your part is not listed it is likely still in scope; send the drawing and we answer within 24 hours.
Program detail: lens barrel case study. Capability: 5-axis machining.
Worked examples with full measurement data: case studies.
Get a quote in 24 h Inspection & QC Tolerance standards
Frequently Asked Questions
How do you protect optical surfaces through production?
Bare precision faces are protected with PE film and parts ship in individual bags with foam, per your packing spec; scratch-sensitive cosmetic faces follow an agreed inspection sample.
Can you hold 0.005 mm concentricity bores to barrels?
Yes, on turned-milled parts in one setup; the CMM report states the measurement so assembly teams can trust it.
Send Your Drawing
Quote with engineering feedback within 24 hours; prototypes in 7 to 15 days.
Request a Quote